Isuzu N Series 2008 Owner's Manual page 470

7-124
SERVICE AND MAINTENANCE
The type (characteristics) of the grease specified for use with a chassis component
differs from that of the grease specified for use with another component. Be sure to
use only the specified grease for each component and perform greasing according to
the Maintenance Schedule.
King pins (left and right)
2 points each
Rigid axle suspension
Propeller shaft centre bearing
Propeller shaft universal joint
Single-piece propeller shaft: 2 points; Two-piece propeller shaft: 3 points
2008N_sec07-2_print2.indd 124
Greasing Chassis Components
Maintenance Schedule
Recommended Fluids, Lubricants and
→ Refer to page 7-159
Diesel Fuels → Refer to page 7-172
Front propeller shaft
Double cardan joint
3 points
4WD model
Propeller shaft splines
3/09/2008 5:54:00 PM