Isuzu N Series 2008 Owner's Manual page 459

Hide thumbs Also See for N Series 2008:

Table of Contents

Quantity of rear axle differential gear oil to be changed

(all except straight frame models)

(straight frame model)

2008N_sec07-2_print2.indd 113

SERVICE AND MAINTENANCE

Changing the Oil

(lower edge of level

check plug hole)

HCU7C0SH005201

Specifications

292 mm final drive

320 mm final drive

1. Place a container under the drain plug

to receive oil.

2. Remove the plugs indicated in the

figure to discharge the oil into the

3. After installing the drain plug by

tightening it to the specified torque,

refill the rear axle differential with new

oil through the oil level plug hole up to

the lower edge of the hole.

Plug tightening torque

84 N·m (8.6 kgf·m/62 lb·ft)

Any dirt on the plug should be wiped

off before installing it.

4. After refilling, confirm that the oil level

is up to the lower edge of the oil level

5. Install the oil level plug by tightening it

to the specified torque.

Plug tightening torque

84 N·m (8.6 kgf·m/62 lb·ft)

Oil quantity [Reference value]

(0.79 US gal./0.66 Imp gal.)

(0.89 US gal./0.75 Imp gal.)

(1.14 US gal./0.95 Imp gal.)

3/09/2008 5:53:51 PM

Show Quick Links

Table of Contents