Isuzu N Series 2008 Owner's Manual page 449

2008N_sec07-2_print2.indd 103
SERVICE AND MAINTENANCE
5. Press the clutch pedal several times
and then keep it pressed.
6. Loosen the bleeder screw to let the
clutch fluid containing air bubbles flow
into the container and then tighten the
bleeder screw immediately.
7. Release the clutch pedal slowly.
Repeat Steps 5 and 6 until the fluid
from the tube no longer contains air
bubbles. After bleeding, install the
rubber cap in position.
CAUTION
• While bleeding, ensure that the fluid
level in the clutch fluid tank is not
below the "MIN" mark.
7-103
3/09/2008 5:53:42 PM