Isuzu N Series 2008 Owner's Manual page 137

4-9
CONTROLS AND INSTRUMENTS
Speedometer
Model without multi-information The speedometer indicates the vehicle
display (MID) speed in km/h or MPH. The speedometer
is an integral unit with the odometer/trip
meter. Each time you press the reset
button lightly with the starter switch in the
"ON" position, the odometer/trip meter
shows "ODO", "TRIP A" and "TRIP B" in
this sequence and one at a time to indicate
the selected meter.
Odometer
The total distance traveled by your vehicle
is indicated in km if the speedometer is
Model with MID
graduated in kilometer units. The total
distance traveled by your vehicle is
indicated in miles if the speedometer is
graduated in both mile and kilometer units.
When 999,999 kilometers (or 999,999
miles) are exceeded, "B" is displayed.
Trip Meter
Use the trip meter to learn the distance
between the specific points or the distance
traveled during a specific period of time.
In the case of a speedometer graduated
in kilometers, the value to the right of
the decimal point indicates 100-m units,
whereas in the case of a speedometer
graduated in both miles and kilometers, this
value indicates 0.1-mile units. In addition,
two separate distances can be associated
with "TRIP A" and "TRIP B". Use the two
trip meters by switching between "TRIP A"
and "TRIP B" as appropriate.
If you want to reset the trip meter, use the
select/reset knob to select and display
the trip meter that you want to reset.
The starter switch should be in the "ON"
position. Then, press and hold the knob
down for at least one second.
2008N_sec04-1_print2.indd 9 3/09/2008 5:28:03 PM