Isuzu N Series 2008 Owner's Manual page 197

Exhaust brake indicator light
ADVICE
• If a warning buzzer sounds when the exhaust brake is in operation, promptly
pull the vehicle over safely and contact the nearest Isuzu Dealer for inspection.
• Even if the gearshift lever is placed in the "N" position, the exhaust brake does
not disengage until the engine is warmed up if the warm-up system is on.
2008N_sec04-1_print2.indd 69
CONTROLS AND INSTRUMENTS
Exhaust Brake Switch
To apply the exhaust brake, pull the lever
backward. The exhaust brake indicator
light comes on. To disengage the exhaust
brake, press the accelerator pedal or the
clutch pedal (if your vehicle is a manual
transmission vehicle). Releasing the pedal
reengages the exhaust brake.
• If your vehicle is equipped with a
AMT, the exhaust brake is disengaged
during gear shifting or when the
engine speed is reduced before the
vehicle comes to a stop. The exhaust
brake reengages when gear shifting is
completed or when the engine speed
increases sufficiently.
• It is extremely dangerous to apply
the exhaust brake on slippery roads
(with their surfaces being wet,
frozen, or covered with compacted
snow) as the tyres can skid.
CAUTION
4-69
3/09/2008 5:29:00 PM