Isuzu N Series 2008 Owner's Manual page 353

Storage Location in Crew Cab Model
2008N_sec07-1_print2.indd 7
SERVICE AND MAINTENANCE
Storage Location in Single Cab Model
Passenger's seat
seatback
LNU770SH007801
Tools
The tools are stored behind the driver's
and passenger's seats. Tilt the seatbacks
forward to take out the tools.
ADVICE
• If your vehicle has a back panel
tray, the back panel tray must be
removed before you can take out or
store the tools.
Driver's Seat
Passenger Seat/Centre Seat
The tools are stored under the rear seat.
To take out the tools, remove the seat
cushion by pulling up the front.
ADVICE
• It is recommended that you
familiarize yourself with the contents
and use of the various tools and the
jack before using them.
• After finishing work with the tools,
return them to the correct storage
location and ensure that they will
not move while the vehicle will be in
motion.
• Triangle reflectors must always be
kept inside the vehicle.
7-7
→ Refer to page 3-18
V
→ Refer to page 3-19
V
3/09/2008 5:47:17 PM