Table of Contents
Advertisement
8-12
IN CASE OF EMERGENCY
Use a jumper cable (sold separately) and the batteries of another vehicle to start the
engine in this sequence.
CAUTION
•
For safety and the protection of the vehicle, don't push-start the vehicle.
•
Make sure that the booster batteries in the vehicle providing the charge have
the same voltage as the disabled vehicle.
•
Under no circumstances should the battery's positive and negative terminals be
put in contact with one another.
•
When connecting the cables, under no circumstances should the clips be
allowed to touch each other.
•
Ask the nearest Isuzu Dealer to recharge the battery.
•
Do not disconnect a battery terminal with the engine running. It could cause a
breakdown in the electrical system.
1. Check the battery fluid level in the disabled vehicle.
2. Use a vehicle that has a charged battery with the same voltage.
3. Remove the battery cover and connect the jumper cables in the numbered
sequence in the drawing.
4. After connecting the cables, start the engine of the vehicle with the booster
battery.
5. Slightly rev up the engine of the vehicle with the booster battery and start the
engine of the disabled vehicle.
6. If the engine in the disabled vehicle starts, remove the jumper cables in the
reverse sequence as they were connected.
2008N_sec08_print2.indd 12
When the Battery Goes Flat
4/09/2008 8:14:21 AM
Hide quick links:
Advertisement
Table of Contents
