Isuzu N Series 2008 Owner's Manual page 238

4-110
CONTROLS AND INSTRUMENTS
Accelerating during Cruise Control Driving
If you want to accelerate temporarily to pass another vehicle while driving using the
cruise control, depress the accelerator pedal. When you release the accelerator pedal,
the speed returns to the original set vehicle speed.
Changing the Cruise Control Speed Setting
Cruise control resume switch
Cruise control set switch
2008N_sec04-2_print2.indd 110
When Increasing Vehicle Speed
When the cruise control resume switch is
operated, the speed increases while the
switch is held.
After the speed is increased to the desired
vehicle speed, and the switch is released,
the speed is set at the increased vehicle
speed. If you want to increase the speed
quickly, depress the accelerator pedal and
accelerate to the desired vehicle speed.
Then, operate the cruise control set switch.
When Increasing Vehicle Speed
Slightly
If the cruise control resume switch is
operated and released immediately, the set
vehicle speed increases 1 km/h (0.6 MPH)
per operation.
When Decreasing Vehicle Speed
When the cruise control set switch is
operated, the speed decreases while the
switch is held.
After the speed is decreased to the desired
vehicle speed, and the switch is released,
the speed is set at the decreased vehicle
speed. If you want to decrease the speed
quickly, depress the brake pedal to cancel
cruise control and decelerate to the desired
vehicle speed. Then, operate the cruise
control set switch.
When Decreasing Vehicle Speed
Slightly
If the cruise control set switch is operated
and released immediately, the set vehicle
speed decreases 1 km/h (0.6 MPH) per
operation.
3/09/2008 5:31:53 PM