Isuzu N Series 2008 Owner's Manual page 259

2008N_sec04-2_print2.indd 131
CONTROLS AND INSTRUMENTS
Lever-type PTO
To Engage the PTO
1. Fully pull up the parking brake lever,
and with the vehicle at a complete
stop, set the gearshift lever in the "N"
position. Then, start the engine.
2. Depress the clutch pedal fully, and
after waiting for a short time, lower
the PTO lever while pressing the lock
button in order to engage the PTO.
3. Slowly remove your foot from the
clutch pedal.
To Disengage the PTO
1. While depressing the clutch pedal,
press the lock button on the PTO
lever and move the lever from the
"ON" position to the "OFF" position.
2. Slowly remove your foot from the
clutch pedal.
• Before starting the vehicle, you
should confirm the following.
- The special equipment is in a safe
condition for driving.
- The PTO lever is in the "OFF"
position.
M/T
CAUTION
4-131
3/09/2008 5:32:04 PM