Isuzu N Series 2008 Owner's Manual page 360

7-14
SERVICE AND MAINTENANCE
WARNING
• After lowering the cab, make sure the cab is securely locked.
CAUTION
• Note that when a load is present inside or outside the cab, it will lower faster.
2008N_sec07-1_print2.indd 14
Lowering the Cab
1. If a lock pin is equipped, remove it
and place it in the holder.
2. Holding the grip (D) in your left hand
to support the cab, release the lock
(E) using your right hand and pull the
tilt support towards the rear of the
vehicle to fold it down.
3. Holding the grip (D), drop the cab with
enough force to ensure that the lever
(B) engages, and then confirm that
this lever has engaged securely.
4. Lower the handle (C) until the lever (A)
is fully locked.
• Confirm that the lock section of lever
(A) has securely engaged.
NOTE
3/09/2008 5:47:25 PM