Isuzu N Series 2008 Owner's Manual page 456

7-110
SERVICE AND MAINTENANCE
Single cab model
Crew cab model
Correct level range
for low oil temperatures
CAUTION
• Be extremely careful not to burn yourself when checking the oil level if the
engine temperature is high. Protect yourself with gloves, etc.
2008N_sec07-2_print2.indd 110
Checking the Oil Level
C H
Correct level range
for high oil temperatures
MFU770SH012301
1. Park the vehicle on level ground,
place the gearshift lever in the "N"
position and firmly apply the parking
brake.
2. Start the engine.
3. Pull out the dipstick and wipe it with a
clean cloth.
4. Reinsert the dipstick into position and
then, while the engine is running at
idle, pull out the dipstick slowly and
check whether the oil level is within
the "C" marked range on the dipstick
when the oil temperature is low, or
within the "H" marked range when the
oil temperature is high.
5. If the oil level is too low, add oil as
necessary.
6. After checking, insert the dipstick fully
into position.
Mark on
AMT clutch oil temperature
dipstick
COLD (C) About 20 - 30°C (68 - 86°F)
HOT(H) About 70 - 80°C (158 - 176°F)
3/09/2008 5:53:50 PM