Isuzu N Series 2008 Owner's Manual page 441

Model or
Specification
Single Tyre
Dual Tyres
ADVICE
• After changing a tyre, turn the steering wheel in both directions to make sure
that the wheels do not interfere with the surrounding components. If you are
unclear about any of this, please contact the nearest Isuzu Dealer.
• The tightening torque of the wheel nuts may decrease after tyre replacement
due to their initial settlement. Upon driving 50 to 100 km (31 to 62 miles) after
a tyre change, retighten the wheel nuts to the specified torque according to the
instructions in the "Retightening Wheel Nuts" section in this chapter.
2008N_sec07-2_print2.indd 95
SERVICE AND MAINTENANCE
Front wheel nuts
Tightening torque Quantity
138 - 196 N·m
(14 - 20 kgf·m/
101 - 145 lb·ft)
441 - 539 N·m
(45 - 55 kgf·m/ 5 or 6
325 - 398 lb·ft)
Retightening Wheel Nuts
8. Finally, tighten all wheel nuts using a
torque wrench to the specified torque.
You must tighten the nuts of the rear
inner wheel before tightening the nuts
of the rear outer wheel even when
you change only the rear outer wheel.
Rear wheel nuts
Tightening torque
138 - 196 N·m
6 (14 - 20 kgf·m/
101 - 145 lb·ft)
441 - 539 N·m
(45 - 55 kgf·m/
325 - 398 lb·ft)
→ Refer to page 7-96
7-95
Quantity
6
5 or 6
3/09/2008 5:53:34 PM