Isuzu N Series 2008 Owner's Manual page 232

4-104
CONTROLS AND INSTRUMENTS
ADVICE
• When a failure warning is issued, the HSA system is faulty. Have your vehicle
inspected at the nearest Isuzu Dealer as soon as possible.
2008N_sec04-2_print2.indd 104
Initial Adjustment of HSA
Warning of HSA→ Refer to page 4-106
If your vehicle has a manual transmission,
make an initial adjustment of the HSA in
the following cases. No initial adjustment is
necessary for a AMT equipped model.
• The clutch is replaced or play of the
• The HSA releases the brakes much
• The control unit of the HSA is
Adjustment
1. Pull the parking brake lever, make
2. Depress the clutch pedal, place the
3. Slowly release the clutch pedal and
4. Depress the clutch pedal, place the
clutch pedal is adjusted.
too slowly or much too quickly when
the vehicle is started.
replaced.
sure the gearshift lever is placed in
the "N" position and then start the
engine.
gearshift lever into the "2 (2nd)"
position and press the HSA reset
switch. A buzzer makes two short
beeps repeatedly and the HSA
indicator light flashes.
when the engine speed drops 30 to
50 r/min from the idle speed, press
either the "FAST" side or "SLOW"
side of the HSA adjustment switch.
The buzzer then stops sounding.
gearshift lever into the "N" position
and slowly release the clutch pedal.
3/09/2008 5:31:51 PM