Isuzu N Series 2008 Owner's Manual page 396

7-50
SERVICE AND MAINTENANCE
2008N_sec07-1_print2.indd 50
Cleaning the Air Cleaner Element
Choose one of the following cleaning
methods depending on how the element
has become dirty.
1. When dry dust has adhered to the
element
a. Blow compressed air at a pressure
of up to 690 kPa (7.0 kgf/cm
psi) against the inside of the
element while turning it to remove
the dust.
b. Check to see if the element has
been damaged or become thin in
places.
2. When the element has become
blackened by oily smoke or soot
a. Soak the element in a mixture of
water and neutral detergent for
about 30 minutes.
b. Remove the element from the
detergent solution and rinse well
using tap water.
c. After cleaning, allow the element
to dry naturally in a well-ventilated
place.
ADVICE
• Do not hit or strike the element, as
this might damage it.
• Air drying will take 2 or 3 days. We
recommend using a spare element.
2
/100
3/09/2008 5:47:46 PM