Isuzu N Series 2008 Owner's Manual page 422

7-76
SERVICE AND MAINTENANCE
2008N_sec07-2_print2.indd 76
Adjustment of Drum-to-Lining Gap
(Model without Automatic Adjuster)
1. Apply the parking brake firmly and
chock the wheels.
2. Raise the vehicle until the wheel is
completely clear of the ground.
3. Support the raised vehicle with jack
stands.
4. Remove the rubber plug from the
adjustment hole in the backing plate.
5. Insert a screwdriver into the
adjustment hole and turn in the
direction indicated by the arrow on the
backing plate until the adjuster wheel
can no longer be turned.
6. From this point, turn the adjuster
wheel back by 5 or 6 teeth. After
adjustment, install the adjustment
hole's rubber plug in place.
3/09/2008 5:53:20 PM