Isuzu N Series 2008 Owner's Manual page 533

Hide thumbs Also See for N Series 2008:
Table of Contents

Advertisement

NOTE
When it is difficult to start the engine in a cold area, first start the engine of the
vehicle with the booster batteries and a few minutes after that start the engine
of the disabled vehicle.
WARNING
Check the battery fluid level before connecting the jumper cables. Usage or
charging of the battery when the battery fluid is below the "LOWER LEVEL"
can accelerate deterioration, and give rise to dangerous situations such as the
generation of heat and may even cause an explosion. Perform the work after
adding the battery fluid.
A vehicle battery generates flammable gas that could explode. Be careful of the
following to avoid creating sparks.
-
Do not connect one end of the jumper cable shown in Step 4 in the drawing
directly to the battery's negative terminal. Connect the jumper cable to a
metal part of the engine that is away from the battery.
-
Do not let the cable connected to the positive terminal come in contact with
the cable connected to the negative terminal or the body.
-
Keep flames away from the battery.
Use care not to become entangled in any belts when connecting the cable.
2008N_sec08_print2.indd 13
IN CASE OF EMERGENCY
8-13
4/09/2008 8:14:21 AM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents