Isuzu N Series 2008 Owner's Manual page 237

Cruise control set switch
Cruise control set indicator light
2008N_sec04-2_print2.indd 109
CONTROLS AND INSTRUMENTS
2. Use the accelerator pedal to adjust
the vehicle to a desired speed
between approximately 40 and
80 km/h (25 and 50 MPH). Upon
reaching the desired speed, operate
the cruise control set switch. The
vehicle speed at the moment you
operate the switch is set in the
system, enabling you to drive with the
set speed automatically maintained
without using the accelerator pedal.
At the same time the cruise control
set indicator light comes on.
• When you use the exhaust brake,
the cruise control cannot be set.
Turn off the exhaust brake switch.
Exhaust Brake Switch
NOTE
→ Refer to page 4-69
4-109
3/09/2008 5:31:53 PM