Isuzu N Series 2008 Owner's Manual page 258

4-130
CONTROLS AND INSTRUMENTS
2008N_sec04-2_print2.indd 130
To Disengage the PTO
Press the PTO switch. While the buzzer is
making short, repeated beeps, press the
lock button on the PTO lever and move the
lever from the "ON" position to the "OFF"
position.
CAUTION
• Before starting the vehicle, you
should confirm the following.
- The special equipment is in a safe
condition for driving.
- The PTO lever and the PTO
switch are in the "OFF" position.
NOTE
• Press the PTO switch and then
operate the PTO lever within
approximately 10 seconds.
• If it is not possible to operate the
PTO lever within approximately 10
seconds, press the PTO switch once
again, and then operate the lever.
3/09/2008 5:32:04 PM