Isuzu N Series 2008 Owner's Manual page 447

Adding Clutch Fluid
If the level of clutch fluid has dropped below the "ADD" line, remove the clutch fluid
tank cap and add fluid. Add the specified clutch fluid up to the "MAX" line.
CAUTION
• Before refilling the tank, clean the area around the cap and fill clutch fluid from a
clean container. Foreign objects getting in the tank will lead to a clutch system
failure.
• Clutch fluid melts paintwork and vehicle component materials such as plastic,
vinyl and rubber. It is also highly corrosive on metals. If it is spilled, immediately
wipe the area clean or wash away the fluid with water.
• Do not mix clutch fluid with fluids of a non-specified brand. Due to chemical
reactions, any mixture of differently branded fluids will cause failure of the clutch
system.
Changing Clutch Fluid
Change the clutch fluid according to the Maintenance Schedule using the specified
fluid. Since a clutch fluid change requires disassembly of the related components,
have this service performed by your Isuzu Dealer.
2008N_sec07-2_print2.indd 101
SERVICE AND MAINTENANCE
7-101
3/09/2008 5:53:41 PM