Isuzu N Series 2008 Owner's Manual page 359

WARNING
• If the lock (E) has not been fully
engaged, there is a danger that the
cab may accidentally fall.
2008N_sec07-1_print2.indd 13
SERVICE AND MAINTENANCE
Tilting Up the Cab
1. Apply the parking brake firmly and
make sure that the gearshift lever is in
the "N" position. Close all doors fully.
2. Holding the grip (D) in your left hand,
pull the lever (A) toward you using
your finger, and then raise the handle
(C) using your right hand.
3. Holding the grip (D) in your left hand,
pull the lever (B) toward you using
your right hand to raise the cab.
4. When you have raised the cab,
support the cab with the grip (D) using
your left hand and confirm that the tilt
support's lock (E) has been securely
engaged.
5. If a lock pin is equipped, insert it
correctly.
7-13
3/09/2008 5:47:23 PM