Isuzu N Series 2008 Owner's Manual page 185

CAUTION
• If your vehicle is a PTO-equipped model, check that the "PUSH DPD SWITCH"
(amber) message is not flashing when you use the PTO for an extended time
period.
• During extended engine idling, the "MANUAL REGEN." (amber) message may
appear on the MID and the DPD may be automatically regenerated.
2008N_sec04-1_print2.indd 57
CONTROLS AND INSTRUMENTS
Multi-Information Display (MID)
Diesel Particulate Defuser (DPD)
Diesel Particulate Defuser (DPD)
DPD Manual Regeneration Procedure
Procedure for Selectable Regeneration
of DPD
Meter Failure
Model with MID
This message appears on the display when
there is a problem with the instrument
panel. While the message is displayed,
the instrument panel does not function
properly.
Pull off to a safe place, stop the engine,
and restart it. If the message still appears,
contact the nearest Isuzu Dealer.
CAN System Error
Model with MID
This message appears on the display when
the instrument panel cannot establish
normal communications with connected
systems.
If a CAN error has occurred, the engine
coolant temperature gauge stops
functioning and the alarming functions of
the panel do not work properly. Pull off to
a safe place, stop the engine and restart
it. If the message still appears, contact the
nearest Isuzu Dealer.
→ Refer to page 4-17
→ Refer to page 2-60
→ Refer to page 4-154
→ Refer to page 4-156
→ Refer to page 4-159
V
V
4-57
V
3/09/2008 5:28:51 PM