Isuzu N Series 2008 Owner's Manual page 108

3-10
DOORS, WINDOWS AND SEATS
The power windows operate only when the starter switch is in the "ON" position. Open
each door window by pressing the power window switch; close each one by raising the
switch.
WARNING
• Before closing the windows, make sure that there is no risk of a hand, head or
anything else being trapped in the moving window. Failure to do so could result
in serious injury. This is especially true when a child is with you.
NLR/NNR/NPR/NQR/NPS models
2008N_sec03_print2.indd 10
Power Windows
Window Switches on Driver's Door
V
To Open the Driver's Window
Lightly pressing the driver-side window
switch will lower the driver's window until
the switch is released (manual mode
operation). When the switch is firmly
pressed, the window will lower completely
without the need to press the switch
continuously (automatic mode operation). If
you want to stop the automatic movement
of the window before it lowers completely,
raise the switch lightly.
To Close the Driver's Window
Lightly raising the driver-side window
switch will cause the driver's window to
move up until the switch is released.
To Open the Passenger's Window
The passenger's window continues to
lower while the passenger-side switch on
the driver's door is being pressed.
To Close the Passenger's Window
The passenger's window continues to
move up while the passenger-side switch
on the driver's door is being raised.
3/09/2008 4:35:44 PM