Isuzu N Series 2008 Owner's Manual page 152

4-24
CONTROLS AND INSTRUMENTS
7. Turn the MID select knob clockwise to increase the day and counterclockwise
to decrease the day. If you hold the switch after turning it clockwise or
counterclockwise, the day continues to increase or decrease until the switch is
released.
8. To complete the calendar setting, press and hold the MID select knob.
When the setting is complete, the normal calendar display will resume.
[Setting the clock]
1. Press the MID select knob once or more to select the calendar.
2. Turn the MID select knob clockwise to select the clock screen.
3. Press and hold the MID select knob to enter the clock setting screen. The hour
segment starts flashing.
4. Set the hour: Turn the MID select knob clockwise to increase the hour and
counterclockwise to decrease the hour. If you hold the switch after turning it
clockwise or counterclockwise, the hour continues to increase or decrease until
the switch is released.
5. Set the minute: While in the hour setting screen, press the MID select knob once
to switch to the minute setting screen. The minute segment starts flashing.
6. Turn the MID select knob clockwise to increase the minutes and counterclockwise
to decrease the minutes. If you hold the switch after turning it clockwise or
counterclockwise, the minutes continue to increase or decrease until the switch is
released.
7. To complete the clock setting, press and hold the MID select knob.
When the setting is complete, the normal clock display will resume.
2008N_sec04-1_print2.indd 24 3/09/2008 5:28:19 PM