Table of Contents
Advertisement
ADVICE
•
Make sure that the needle on the engine coolant temperature gauge is below
"C" before adding coolant. Adding coolant when the engine is not sufficiently
cool could cause a breakdown in the engine or damage it.
•
When tap water only has been used for coolant in an emergency, adjust the
coolant concentration as soon as possible.
When the Meter Shows an Abnormality
2008N_sec08_print2.indd 23
IN CASE OF EMERGENCY
ADVICE
•
When the cooling fan for the radiator
is not turning, turn off the engine
immediately.
4. Check the coolant level in the reserve
tank and radiator after the engine
has sufficiently cooled. If the level is
insufficient, add coolant. Also, check
to see if the fan belt is loose or has
been damaged.
Engine Coolant
Fan Belt
Voltmeter
Briefly press the MID select knob; the
voltmeter will be displayed. When the
abnormal voltage display (red) is indicated
on the multi information display (MID), there
may be excessive battery discharge or the
alternator may not be working properly.
When this occurs, contact the nearest
Isuzu Dealer.
Voltmeter → Refer to page 4-22
8-23
→ Refer to page 7-34
→ Refer to page 7-45
4/09/2008 8:14:25 AM
Hide quick links:
Advertisement
Table of Contents
