Isuzu N Series 2008 Owner's Manual page 168

4-40
CONTROLS AND INSTRUMENTS
Engine Oil and Filter Indicator Light
(Comes on in amber when the next
maintenance interval is near or has
already been reached.)
NOTE
[Checking the engine oil level]
• Check the engine oil level before starting the engine with the vehicle parked on
a level surface.
• Check to see if the engine oil and filter indicator light will appear approximately
8 seconds later than the starter switch is turned to the "ON" position.
• When the engine has been running, wait for at least 30 minutes after stopping
the engine and then check the oil level.
• Press the MID select knob once or more to display any screen other than the
engine oil and filter indicator screen.
2008N_sec04-1_print2.indd 40
Model with Multi-Information Display
(MID)
This message appears on the display
when the engine oil and filter maintenance
screen is selected or when the next engine
oil and filter change interval is near or has
already been reached. The distance shown
is the remaining distance to the change
interval or the distance traveled without
replacement after that time.
When the maintenance interval is near or
has already been reached, this message
appears after the starter switch is turned to
the "ON" position. The message remains
on the display until the MID select knob is
pressed once or the vehicle is started.
When the engine oil and filter indicator light
(amber) has come on, have the vehicle
inspected / serviced at your Isuzu Dealer.
Multi-Information Display (MID)
→ Refer to page 4-17
When ERROR is Displayed
→ Refer to page 4-33
Engine Oil → Refer to page 7-22
Changing the Engine Oil
and Oil Filter → Refer to page 7-28
V
V
3/09/2008 5:28:38 PM