Isuzu N Series 2008 Owner's Manual page 460

7-114
SERVICE AND MAINTENANCE
ADVICE
• Use only the Isuzu recommended differential gear oil.
The front axle differential gear oil level must be checked and it must be changed
according to the Maintenance Schedule.
Oil
surface
2008N_sec07-2_print2.indd 114
Front Axle Differential Gear Oil
Checking the Oil Level
Level check
plug hole
Oil level
(lower edge of level
check plug hole)
HCU7C0SH005201
Recommended Fluids, Lubricants and
Diesel Fuels → Refer to page 7-172
V
Maintenance Schedule
→ Refer to page 7-159
1. Remove the oil level plug.
2. Check that the oil level is up to the
lower edge of the oil level plug hole.
• If the oil level is too low, add oil
through the oil level plug hole.
3. Fasten the oil level plug to the
specified torque.
Plug tightening torque
84 N·m (8.6 kgf·m/62 lb·ft)
ADVICE
• Any dirt on the plug should be wiped
off before installing it.
3/09/2008 5:53:52 PM