Isuzu N Series 2008 Owner's Manual page 481

2008N_sec07-2_print2.indd 135
SERVICE AND MAINTENANCE
Push up the blade.
MFU770SH011501
Installation
1. Insert the blade while holding it almost
perpendicular to the arm.
2. Then, with the blade and arm oriented
in the same direction, push up the
blade until it locks into place on the
arm.
ADVICE
• Do not lower the wiper arm with its
blade removed; the windshield glass
may be scratched.
• Whenever a wiper blade has been
attached, ensure that it is locked
into place. Failure to observe this
precaution can result in the wiper
blade becoming dislocated when
the windshield wiper switch is turned
on.
7-135
3/09/2008 5:54:08 PM