Isuzu N Series 2008 Owner's Manual page 262

4-134
CONTROLS AND INSTRUMENTS
PTO indicator light
2008N_sec04-2_print2.indd 134
To Disengage the PTO
1. Press the PTO switch while
depressing the clutch pedal.
Then make sure that the PTO
indicator light in the instrument panel
goes out and PTO drive is stopped.
2. Slowly remove your foot from the
clutch pedal.
CAUTION
• Before starting the vehicle, you
should confirm the following.
- The special equipment is in a safe
condition for driving.
- The PTO switch is in the "OFF"
position.
LNU740SH001201
3/09/2008 5:32:06 PM