Isuzu N Series 2008 Owner's Manual page 355

Catches
2008N_sec07-1_print2.indd 9
SERVICE AND MAINTENANCE
Inspection Hatches
Engine Maintenance Lid
Lever
Belt
Seat cushion
Lever
LNU770SH008301
V
V
Opening
1. Lift the catch levers located at the
front of the passenger's seat cushion
to release the lock.
2. Lift up the seat cushion and attach
the belt extending from behind the
seatback to the left catch lever to hold
the cushion in the raised position.
Closing
1. Detach the belt from the catch lever
and lower the seat cushion to a point
approximately 30 cm (12 in) above
its original position. Allow the seat
cushion to drop into place, and then
secure it using the catch levers.
2. Gently push and pull the seat cushion
to make sure that it has been securely
locked in place.
CAUTION
• Take care to avoid jamming fingers,
hands or any other part of your
body when returning the seat
cushion to its original position.
In addition, confirm that the seat
cushion is firmly locked. A seat with
an improperly locked cushion will
be unstable during driving, possibly
causing an accident.
7-9
3/09/2008 5:47:18 PM