Isuzu N Series 2008 Owner's Manual page 186

4-58
CONTROLS AND INSTRUMENTS
A warning buzzer sounds under the following conditions.
Warning
Brake booster
Engine overheat
Back up
V
Diesel particulate
defuser (DPD)
manual
regeneration
Hill-start-aid (HSA)
V
AMT
SA
•
: Long lasting alarm ×: No alarm
* : Refer to "Condition" column.
ADVICE
• The warning buzzer may not sound if there is a problem with the system. If this
occurs, the system needs to be inspected. Please contact the nearest Isuzu
Dealer.
• At night, the buzzer back-up warning sound volume can be reduced by placing
the light control switch in the "ON" position.
NOTE
• On AMT models, a warning buzzer sounds for approximately 1 second when
the starter switch is turned to the "ON" position.
2008N_sec04-1_print2.indd 58
Warning Buzzer
Location
Buzzer
Outside
pattern
In cab
cab
Continuous
•
beep
Continuous
•
beep
•
Long,
repeated
•
beep
Short,
Three
repeated
times
beep
One
Short beep
time
Refer to
*
page 4-106
Refer to
*
page 4-91
Condition
× Refer to page 4-36
× Engine has overheated.
•
Gearshift lever is placed in "
position.
•
"PUSH DPD SWITCH" message is
× flashing. (Model with multi-information
display (MID))
The DPD manual regeneration
× indicator light (amber) is flashing.
(Model without MID)
× Refer to page 4-106
× Refer to page 4-91
R
"
3/09/2008 5:28:52 PM