Isuzu N Series 2008 Owner's Manual page 189

2008N_sec04-1_print2.indd 61
CONTROLS AND INSTRUMENTS
Starter Switch
LOCK : In this position, the key can be
ACC : In this position, the audio and
ON : The key stays in this position
START : The engine is started in this
• If the key cannot be turned
from the "LOCK" position to the
LNU740SH001601
"ON" position, lightly move the
steering wheel clockwise and
counterclockwise while trying to turn
the key.
inserted or removed.
Remove the key and turn the
steering wheel until it locks. The
steering wheel will be locked
to help prevent theft. To place
the starter switch in the "LOCK"
position, press and hold the key
in the "ACC" position and then
turn it to the "LOCK" position.
other accessories can be used
with the engine stopped.
while the engine is running.
This position is also used for
preheating before starting the
engine.
position. Release the key as
soon as the engine has started.
The key automatically returns to
the "ON" position.
NOTE
4-61
3/09/2008 5:28:53 PM