System Board Components - HPE ProLiant MicroServer Gen10 Plus v2 User Manual

This server supports both VGA port and DisplayPort 1.1a. Before connecting a display device to this server, review the information below.
Whenever possible, use the same display connection type. For example, if your PC or monitor only has a VGA output, connect it to the
server VGA port. Use of any kind of adapter or converter cable or dongle might lead to decreased display quality or a lag over the
connection.
DisplayPort connection: When connecting an HDMI or DVI display to the DisplayPort, use an active type adapter. Passive type adapter—
marked with the DP++ symbol—is not supported.
Display output modes:
If you connect two display devices to the VGA port and DisplayPort, the same image is shown on both devices—screen mirroring
mode.
The embedded video controller in the iLO 5 chipset does not support dual display or screen extension mode. To enable dual display
mode, install a compatible PCIe4 graphics card that supports this feature in the expansion slot.
Rear panel LEDs Rear panel LEDs
Item Description Item Description Status Status
1 NIC link Solid green
Off
2 NIC status Solid green
Flashing green
Off

System board components

System board components
Definition Definition
Network link
No network link
Linked to network
Network active
No network activity
HPE ProLiant MicroServer Gen10 Plus v2 User Guide 10