Terminal Connection - IDEC FT1A Series User Manual

Terminal Connection

This section describes types of terminals and how to use them.
When connecting stranded wire or multiple solid wires to a terminal block, use appropriate ferrule for the terminal block.
•
Caution
•
•
•
•
Terminals for Terminal Blocks
Crimp ferrules using an appropriate tool according to the size of ferrules. Cut the end of the wire to the same length or about 0.5
mm longer than the ferrule.
Ensure that the core wire does not protrude at the end of the shield and there are no whiskers.
Ferrules
The ferrules and crimping tools below can be used.
Type numbers of the ferrules and crimping tool are the type numbers of Phoenix Contact.
Ferrule Order No.
Quantity of Cables
For 1-wire connection
For 2-wire connection
Crimping Tool Order No.
Tool Name
Crimping Tool
Do not touch live terminals, otherwise electrical shocks may be caused.
When the power is on, terminals to which external devices are connected may be heated. Do not touch terminals
immediately after the power is turned off.
Do not touch terminals immediately after the power is turned off, otherwise electrical shocks may be caused.
When connecting a stranded wire or multiple solid wires to a screw terminal block, use a ferrule. Otherwise the wire
may slip off the screw terminal block.
When using ferrules, insert a wire to the bottom of the ferrule and crimp the ferrule.
Cable (AWG 22 to 18)
Cable Size
UL1007 AWG16
UL1007 AWG18
UL1015 AWG22
UL2464 AWG24
UL1007 AWG18
UL1015 AWG22
S AXIS P
MART
Cable (AWG 24 to 18)
Correct
0 to 0.5 mm
Damage
Whisker
Stripped wire is too short
Core wire is visible
Phoenix Type
AI 1,5-8 BK
AI 1-8 RD
AI 0,5-8 WH
AI 0,25-8 YE
AI-TWIN 2 x 0,75-8 GY
AI-TWIN 2 x 0,5-8 WH
Phoenix Type
CRIMPFOX ZA 3
/L U ' M FT9Y-B1378
RO ITE SER S ANUAL
3: I
NSTALLATION AND
Order No. Pcs./Pkt.
32 00 04 3 100
32 00 03 0 100
32 00 01 4 100
32 03 03 7 100
32 00 80 7 100
32 00 93 3 100
Order No. Pcs./Pkt.
12 01 88 2
W
IRING
1
3-13