Installation/Removing The Compactflash Card - Mitsubishi Electric Melsec Q Series User Manual

4
SETTINGS AND PROCEDURE TO OPERATION
(6) About a CompactFlash card file
(7) Service life of CompactFlash card

4.7.2 Installation/removing the CompactFlash card

This section explains how to install/remove the CompactFlash card.
(Installation of the CompactFlash card)
Install the CompactFlash card.
Check that the CompactFlash card is fully inserted to the
MES interface module.
(Turning CompactFlash card status (X1) ON indicates
correct installation.)
4
- 15 4.7 CompactFlash Card
4.7.2 Installation/removing the CompactFlash card
(b) Do not format the CompactFlash card with Windows
If doing so by mistake, restore the card according to the CompactFlash card
manual.
User-original files cannot be stored to the CompactFlash card installed to the MES
interface module.
If the user-original files are stored in the card, the characters in directories or files may
be corrupted or deleted.
A CompactFlash card has a service life (restriction on the number of writes).
For details, refer to the specifications of each product.
Generally, the service life of a CompactFlash card is dependant on its free space.
Therefore, set an appropriate value to the user-settable DB buffering capacity so that
a sufficient free space will be ensured on the CompactFlash card.
Section 7.6.4 Setting items in DB buffering setting
Installation of a CompactFlash card
(2) Installation of the CompactFlash card
Is the programmable
controller power ON?
YES
End
Figure 4.11 Installation of the CompactFlash card
NO
Power ON the programmable controller.
®
.