Inserting And Removing An Sd Memory Card - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

4.2

Inserting and Removing an SD Memory Card

The following explains insertion and removal of the SD memory card.
Insertion procedure
Mount the SD memory card. Pay attention to the direction of the card and follow the procedure below.
FX5U CPU module
(1)
FX5UC CPU module
(2)
Removal procedure
FX5U CPU module
(3)
FX5UC CPU module
(2)
(1)
4 PROCEDURES BEFORE OPERATION
26
4.2 Inserting and Removing an SD Memory Card
1.
Insert the SD memory card (1) straight into the SD memory card slot.
Make sure that the notch of the card is directed downward. After
mounting, check that the card is mounted completely. If the card is
mounted incompletely, malfunction may occur due to poor contact.
2.
The CARD LED (2) blinks until the SD memory card becomes available.
3.
The CARD LED turns on when the SD memory card is available.
4.
If the CARD LED does not turn on even though the SD memory card is
mounted, make sure that SM606 (memory card disable request) and
(2)
SM607 (memory card disable status flag) are OFF by using engineering
tools.
(1)
1.
Press the SD memory card stop switch (1) for one second or more to
stop access to the card. The CARD READY LED (2) blinks during the
access stop operation, and then the LED is turned OFF when the
operation is completed.
2.
Insert the SD memory card (3) once, and then pull it straight out.
(1)
(2)
(3)