Centrecom FS980M/9 Command Reference Manual page 483

S T C
PANNING REE OMMANDS
-
SPANNING TREE BPDU
Examples To enable STP BPDU discard in Global Configuration mode with STP disabled,
which discards all ingress STP BPDU frames, enter the commands:
awplus#
awplus(config)#
awplus(config)#
To enable STP BPDU forward in Global Configuration mode with STP disabled,
which forwards any ingress STP BPDU frames to all ports regardless of any VLAN
membership, enter the commands:
awplus#
awplus(config)#
awplus(config)#
To enable STP BPDU forwarding for untagged frames in Global Configuration
mode with STP disabled, which forwards any ingress STP BPDU frames to all ports
that are untagged members of the ingress port's native VLAN, enter the
commands:
awplus#
awplus(config)#
awplus(config)#
To enable STP BPDU forwarding for tagged frames in Global Configuration mode
with STP disabled, which forwards any ingress STP BPDU frames to all ports that are
tagged members of the ingress port's native VLAN, enter the commands:
awplus#
awplus(config)#
awplus(config)#
To reset STP BPDU back to the default discard parameter and re-enable STP on
the switch, enter the commands:
awplus#
awplus(config)#
awplus(config)#
Related show spanning-tree
Commands
spanning-tree enable
613-50137-01 Rev A
configure terminal
no spanning-tree stp enable
spanning-tree bpdu discard
configure terminal
no spanning-tree stp enable
spanning-tree bpdu forward
configure terminal
no spanning-tree stp enable
spanning-tree bpdu forward-untagged-vlan
configure terminal
no spanning-tree stp enable
spanning-tree bpdu forward-vlan
configure terminal
spanning-tree bpdu discard
spanning-tree stp enable
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
483