Show Spanning-Tree Statistics Instance Interface - Centrecom FS980M/9 Command Reference Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE STATISTICS INSTANCE INTERFACE
show spanning-tree statistics instance
interface
Overview This command displays BPDU (Bridge Protocol Data Unit) statistics for the specified
MST (Multiple Spanning Tree) instance and the specified switch port associated
with that MST instance.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show spanning-tree statistics instance <instance-id> interface
Syntax
<port>
Mode Privileged Exec
Example To display BPDU statistics for MST instance 2, interface port1.0.2, use the
command:
awplus#
port1.0.2
613-50137-01 Rev A
Parameter Description
<instance-id>
Specify an MSTP instance in the range 1-5.
<port>
The port to display information about. The port may be a switch
port (e.g. port1.0.4), a static channel group (e.g. sa2), or a
dynamic (LACP) channel group (e.g. po2).
show spanning-tree statistics instance 2 interface
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
"Getting Started
Guide.
476