Show Vlan Classifier Group Interface - Centrecom FS980M/9 Command Reference Manual

VLAN C
OMMANDS

SHOW VLAN CLASSIFIER GROUP INTERFACE

show vlan classifier group interface
Overview Use this command to display information about a single switch port interface for
all configured VLAN classifier groups.
show vlan classifier group interface <switch-port>
Syntax
Mode User Exec and Privileged Exec
Usage All configured VLAN classifier groups are shown for a single interface.
To display VLAN classifier group information for switch port interface port1.0.2,
Example
enter the command:
awplus#
Output Figure 13-2: Example output from the show vlan classifier group interface
Related vlan classifier group
Commands
show vlan classifier interface group
613-50137-01 Rev A
Parameter Description
<switch-port>
Specify the switch port interface classifier group identifier
show vlan classifier group interface port1.0.2
port1.0.1 command:
vlan classifier group 1 interface port1.0.1
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
410