Configuring A Portal Web Server; Enabling Portal Authentication On An Interface - HP MSR Series Configuration Manual

Step
3. Specify the IP address of
the portal authentication
server.
4. (Optional.) Set the
destination UDP port
number used by the
device to send unsolicited
portal packets to the
portal authentication
server.

Configuring a portal Web server

Perform this task to configure the following portal Web server parameters:
•
VPN instance of the portal Web server
•
URL of the portal Web server
•
Parameters carried in the URL when the device redirects the URL to users
The device supports multiple portal Web servers.
To configure a portal Web server:
Step
1. Enter system view.
2. Create a portal Web server
and enter its view.
3. Specify the VPN instance to
which the portal Web server
belongs.
4. Specify the URL of the portal
Web server.
5. Configure the parameters to
be carried in the URL when
the device redirects it to
users.

Enabling portal authentication on an interface

You must first enable portal authentication on an access interface before it can perform portal
authentication for connected clients.
When a portal-enabled interface receives a portal packet, it checks the source IP address and VPN
information of the packet. If the packet matches a locally configured portal authentication server, the
interface regards the packet valid and sends an authentication response packet to the portal
authentication server. Otherwise, the interface drops the packet. After a user logs in to the device,
the user interacts with the portal authentication server as needed.
Command
•
To specify an IPv4 portal server:
ip ipv4-address [ vpn-instance
vpn-instance-name] [ key { cipher |
simple } key-string ]
•
To specify an IPv6 portal server:
ipv6 ipv6-address [ vpn-instance
vpn-instance-name] [ key { cipher |
simple } key-string ]
port port-id
Command
system-view
portal web-server server-name
vpn-instance vpn-instance-name
url url-string
url-parameter param-name
{ original-url | source-address |
source-mac | value expression }
141
Remarks
Specify an IPv4 portal
authentication server, an IPv6
authentication portal server, or
both.
By default, no portal
authentication server is
specified.
By default, the UDP port
number is 50100.
This port number must be the
same as the listening port
number specified on the portal
authentication server.
Remarks
N/A
By default, no portal Web server is
created.
By default, the portal Web server
belongs to the public network.
By default, no URL is specified.
By default, no redirection URL
parameters are configured.