Reset Hwtacacs Statistics - HP A5500 EI Command Reference Manual

port-number: Port number of the primary HWTACACS authorization server. It ranges from 1 to 65535
and defaults to 49.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the primary HWTACACS authorization
server belongs to, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the server is
on the public network, do not specify this keyword and argument combination.
Description
Use the primary authorization command to specify the primary HWTACACS authorization server.
Use the undo primary authorization command to remove the configuration.
By default, no primary HWTACACS authorization server is specified.
The IP addresses of the primary and secondary authorization servers cannot be the same. Otherwise, the
configuration fails.
The HWTACACS service port configured on the device and that of the HWTACACS server must be
consistent.
If the server to be specified resides on an MPLS VPN, you also need to specify that VPN by using the
vpn-instance vpn-instance-name keyword and argument combination to ensure normal communication
with the server. The VPN specified here takes precedence over the VPN specified for the RADIUS scheme.
If you configure the command repeatedly, only the last configuration takes effect.
You can remove an authorization server only when it is not used by any active TCP connection to send
authorization packets.
Related commands: display hwtacacs, hwtacacs scheme, and vpn-instance (HWTACACS scheme view).
Examples
# Configure the IP address and port number of the primary authorization server for HWTACACS scheme
hwt1 as 10.163.155.13 and 49.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49

reset hwtacacs statistics

Syntax
reset hwtacacs statistics { accounting | all | authentication | authorization } [ slot slot-number ]
View
User view
Default level
1: Monitor level
Parameters
accounting: Clears HWTACACS accounting statistics.
all: Clears all HWTACACS statistics.
authentication: Clears HWTACACS authentication statistics.
authorization: Clears HWTACACS authorization statistics.
81