Primary Authentication (Radius Scheme View) - HP MSR Series Command Reference Manual

vpn-instance (RADIUS scheme view)
•

primary authentication (RADIUS scheme view)

Use primary authentication to specify the primary RADIUS authentication server.
Use undo primary authentication to remove the configuration.
Syntax
primary authentication { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple }
string | test-profile profile-name | vpn-instance vpn-instance-name ] *
undo primary authentication
Default
No primary RADIUS authentication server is specified.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the primary RADIUS authentication server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary RADIUS authentication server.
port-number: Specifies the service port number of the primary RADIUS authentication server. The value
range for the UDP port number is 1 to 65535, and the default setting is 1812.
key { cipher | simple } string: Sets the shared key for secure communication with the primary RADIUS
authentication server.
cipher string: Sets a ciphertext shared key. The string argument is case sensitive.
•
In non-FIPS mode, the key is a string of 1 to 1 17 characters.
In FIPS mode, the key is a string of 15 to 1 17 characters.
simple string: Sets a plaintext shared key. The string argument is case sensitive.
•
In non-FIPS mode, the key is a string of 1 to 64 characters.
In FIPS mode, the key is a string of 15 to 64 characters. The string must contain digits, uppercase
letters, lowercase letters, and special characters.
test-profile profile-name: Specifies a test profile for detecting the RADIUS server status. The profile-name
argument specifies the test profile name, which is a case-sensitive string of 1 to 31 characters.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the primary RADIUS authentication
server belongs, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the server is
on the public network, do not specify this option.
Usage guidelines
Make sure that the service port and shared key settings of the primary RADIUS authentication server are
the same as those configured on the server.
Two authentication servers specified for a scheme, primary or secondary, cannot have identical IP
address, port number, and VPN settings.
58