Display Rmon Eventlog - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

Table 45 Command output
Field
EventEntry entry-number
owned by owner is status.
Description
Community
Take the action action
when triggered
last triggered at
time uptime
Related commands
rmon event

display rmon eventlog

Use display rmon eventlog to display information about event log entries.
Syntax
display rmon eventlog [ entry-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
entry-number: Specifies an event entry by its index in the range of 1 to 65535. If you do not specify
an entry, the command displays log entries for all event entries.
Usage guidelines
If the log action is specified for an event, the system adds a record in the event log table each time
the event occurs. Each record contains the log entry index, time when the event was logged (the
amount of time that elapsed since system startup), and event description.
The system can maintain a maximum of 10 records for an event. The most recent record replaces
the oldest record if the number of records reaches 10.
Description
Event entry owner and status:
• entry-number—Event entry index.
owner—Entry owner.
•
• status—Entry status:
VALID—The entry is valid.
UNDERCREATION—The entry is invalid.
The status field is not configurable at the CLI. All alarm entries created from
the CLI are valid by default.
The display rmon event command can display invalid entries, but the
display current-configuration and display this commands do not display
their settings.
Event description.
SNMP community name for the RMON event.
Actions that the system takes when the event is triggered:
• none—Takes no action.
• log—Logs the event.
• trap—Sends an SNMP notification.
• log-trap—Logs the event and sends an SNMP notification.
Last time when the event occurred, which is represented as the amount of
time that elapsed since the system startup.
199