Table of Contents
Advertisement
MLD Settings
To access this page, click L2 Switching > Multicast > MLD Snooping > MLD Settings.
Figure 59: L2 Switching > Multicast > MLD Snooping > MLD Settings
The following table describes the items in the previous figure.
Item
MLD Snooping State
Select Enable or Disable to setup the MLD Snooping State.
MLD Snooping Version Select the querier version (V1 or V2) designated to the MLD Snooping Version.
MLD Snooping Report
Select Enable or Disable to designate the status of the report suppression.
Suppression
Apply
Click Apply to save the values and update the screen.
Table 48: L2 Switching > Multicast > MLD Snooping > MLD Settings
MLD Querier
The MLD Querier page allows you to select and enable/disable the MLD querier and define the
version (IGMPv1 or IGMPv2) when enabled.
To access this page, click L2 Switching > Multicast > MLD Snooping > MLD Querier.
104
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
