Figure 4.37 L2 Switching > Multicast > Mld Snooping > Mld Settings - Advantech EKI-9226G Series User Manual

Multicast Groups
To access this page, click L2 Switching > Multicast > IGMP Snooping > Multicast
Groups.
The ensuing table for Multicast Groups settings are informational only: VLAN ID,
Group IP Address, Member Ports, Type and Life (Sec).
Router Ports
To access this page, click L2 Switching > Multicast > IGMP Snooping > Router
Ports.
The ensuing table for Router Ports settings are informational only: VLAN ID, Port
and Expiry Time (Sec).
4.5.8.3 MLD Snooping
The MLD Snooping page allows you to select the snooping status (enable or dis-
able), the version (v1 or v2) and the enabling/disabling of the report suppression for
the MLD querier, which sends out periodic general MLD queries and are forwarded
through all ports in the VLAN.
MLD Settings
To access this page, click L2 Switching > Multicast > MLD Snooping > MLD Set-
tings.
Figure 4.37 L2 Switching > Multicast > MLD Snooping > MLD Settings
The following table describes the items in the previous figure.
Item
MLD Snooping State Select Enable or Disable to setup the MLD Snooping State.
MLD Snooping Ver-
sion
MLD Snooping
Report Suppression
Apply
The ensuing table for MLD Snooping Information settings are informational only:
MLD Snooping State, MLD Snooping Version and MLD Snooping V2 Report Sup-
pression.
The ensuing table for MLD Snooping Table settings are informational only: Entry
No., VLAN ID, MLD Snooping Operation State, Router Ports Auto Learn, Query
Robustness, Query Interval (sec.), Query Max Response Interval (sec.), Last Mem-
ber Query count, Last Member Query Interval (sec), Immediate Leave and Edit (click
to modify the settings).
Description
Select the querier version (V1 or V2) designated to the MLD Snooping
Version.
Select Enable or Disable to designate the status of the report sup-
pression.
Click Apply to save the values and update the screen.
56 EKI-9226G Series User Manual