Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
VLAN ID
Group IP Address
Member Ports
Add
The ensuing table for IGMP Static Groups Status settings are informational only:
VLAN ID, Group IP Address, Member Ports and Modify.
Multicast Groups
To access this page, click L2 Switching > Multicast > IGMP Snooping > Multicast
Groups.
The ensuing table for Multicast Groups settings are informational only: VLAN ID,
Group IP Address, Member Ports, Type and Life (Sec).
Router Ports
To access this page, click L2 Switching > Multicast > IGMP Snooping > Router
Ports.
The ensuing table for Router Ports settings are informational only: VLAN ID, Port
and Expiry Time (Sec).
4.5.8.3
MLD Snooping
The MLD Snooping page allows you to select the snooping status (enable or
disable), the version (v1 or v2) and the enabling/disabling of the report suppression
for the MLD querier, which sends out periodic general MLD queries and are
forwarded through all ports in the VLAN.
MLD Settings
To access this page, click L2 Switching > Multicast > MLD Snooping > MLD
Settings.
Figure 4.35 L2 Switching > Multicast > MLD Snooping > MLD Settings
The following table describes the items in the previous figure.
Item
MLD Snooping State Select Enable or Disable to setup the MLD Snooping State.
MLD Snooping
Version
MLD Snooping
Report Suppression
Apply
The ensuing table for MLD Snooping Information settings are informational only:
MLD Snooping State, MLD Snooping Version and MLD Snooping V2 Report
Suppression.
Description
Select the VLAN ID to define IGMP static group.
Enter the IP address assigned to the VLAN ID.
Enter the port numbers to associate with the static group.
Click Add to add an IGMP group.
Description
Select the querier version (V1 or V2) designated to the MLD Snooping
Version.
Select Enable or Disable to designate the status of the report
suppression.
Click Apply to save the values and update the screen.
55
EKI-7428 Series User Manual
Advertisement
Table of Contents
