Figure 4.37 L2 Switching > Multicast > Mld Snooping > Mld Settings; Figure 4.38 L2 Switching > Multicast > Mld Snooping > Mld Querier - Advantech EKI-7706 Series User Manual

4.5.8.3 MLD Snooping
The MLD Snooping page allows you to select the snooping status (enable or
disable), the version (v1 or v2) and the enabling/disabling of the report suppression
for the MLD querier, which sends out periodic general MLD queries and are
forwarded through all ports in the VLAN.
MLD Settings
To access this page, click L2 Switching > Multicast > MLD Snooping > MLD
Settings.
Figure 4.37 L2 Switching > Multicast > MLD Snooping > MLD Settings
The following table describes the items in the previous figure.
Item
MLD Snooping State Select Enable or Disable to setup the MLD Snooping State.
MLD Snooping
Version
MLD Snooping
Report Suppression
Apply
The ensuing table for MLD Snooping Information lists the following settings
(informational only):
MLD Snooping State, MLD Snooping Version and MLD Snooping V2 Report
Suppression
The ensuing table for MLD Snooping Table lists the following settings (informational
only):
Entry No., VLAN ID, MLD Snooping Operation State, Router Ports Auto Learn,
Query Robustness, Query Interval (sec.), Query Max Response Interval (sec.),
Last Member Query count, Last Member Query Interval (sec), Immediate Leave
and Edit (click to modify the settings)
MLD Querier
The MLD Querier page allows you to select and enable/disable the MLD querier and
define the version (IGMPv1 or IGMPv2) when enabled.
To access this page, click L2 Switching > Multicast > MLD Snooping > MLD
Querier.
Figure 4.38 L2 Switching > Multicast > MLD Snooping > MLD Querier
EKI-7706 Series User Manual
Description
Select the querier version (V1 or V2) designated to the MLD Snooping
Version.
Select Enable or Disable to designate the status of the report
suppression.
Click Apply to save the values and update the screen.
61