Select / Set Button - Siemens SIMATIC NET SCALANCE XC-200 Series Operating Instructions Manual

3.3

SELECT / SET button

Position
The "SELECT/SET" button is located on the front of the device.
Figure 3-1
Setting the display mode
To set the required display mode, press the "SELECT/SET" button.
For more detailed information on the display modes, refer to the section "LEDs "DM1" and
"DM2" (Page 31)".
Resetting the device to factory defaults
NOTICE
Previous settings
If you reset, all the settings you have made will be overwritten by factory defaults.
NOTICE
Inadvertent reset
An inadvertent reset can cause disturbances and failures in the configured network.
SCALANCE XC-200
Operating Instructions, 12/2017, C79000-G8976-C442-03
Position of the "SELECT/SET" button, for example on the SCALANCE XC-200 with 8 ports
Description of the device
3.3 SELECT / SET button
27