Table of Contents
Advertisement
3.4
SET button
Position
The "SET" button is located on the front of the device.
Figure 3-1
Function
With the SET button, you can display and change the set fault mask.
Setting the fault mask
Factory setting
In its delivery condition (factory default), the following settings are monitored via the message
screen:
• Link up to all ports
• Redundant power supply (L1+/M1 und L2+/M2) connected
When you turn the device on and at least one of the settings is not fulfilled, the device registers
a fault. Switch the device to the required operating mode and save these settings in the message
screen.
Changing the setting
The changed settings remain after cycling power to the device.
Different settings are made depending on how long you hold down the SET button, as described
in the following table:
SCALANCE XC-100
Operating Instructions, 06/2022, C79000-G8976-C415-06
Position of the "SET" button
Description of the device
3.4 SET button
19
Advertisement
Table of Contents
