Dell N1100-ON Reference Manual page 1338

Source
Metric
Match Value
Distribute List
Route Map
Neighbor
ASN
MsgRcvd
MsgSent
State
Up/Down Time
Pfx Rcvd
Command History
Introduced in version 6.2.0.1 firmware.
Modified in version 6.3.0.1 firmware.
Example
console#show bgp ipv6 summary
IPv6 Routing .................................. Enable
BGP Admin Mode ................................ Enable
BGP Router ID ................................. 1.1.1.1
Local AS Number ............................... 65001
Traps ......................................... Disable
Maximum Paths ................................. 1
Maximum Paths iBGP ............................ 1
Default Keep Alive Time ....................... 30
A source of routes that BGP is configured to
redistribute.
The metric configured with the redistribute command.
For routes redistributed from OSPF, the types of OSPF
routes being redistributed.
The name of the prefix list used to filter redistributed
routes, if one is configured with the distribute-list out
command.
The name of the route map used to filter redistributed
routes.
The IP address of a neighbor
The neighbor's ASN
The number of BGP messages received from this
neighbor
The number of BGP messages sent to this neighbor
The adjacency state. One of IDLE, CONNECT,
ACTIVE, OPEN SENT, OPEN CNFRM, EST
How long the adjacency has been in the
ESTABLISHED state, or, if the adjacency is down, how
long it has been down. In days:hours:minutes:seconds
The number of IPv6 prefixes received from the neighbor
Layer 3 Routing Commands
1338