Dell N1100-ON Reference Manual page 1341

Send Community
Neighbor AS Path Access
List Out
Neighbor Prefix List Out
Neighbor Route Map Out
Members Added
Members Removed
Update Version
Number of UPDATEs Sent The number of UPDATE messages that have been sent
Time Since Last UPDATE Time since an UPDATE message was last sent to the
Current Prefixes
Current Paths
Prefixes Advertised
Prefixes Withdrawn
UPDATE Send Failures
Current Members
Command History
Introduced in version 6.2.0.1 firmware.
Whether BGP communities are included in route
advertisements to members of the group. Yes or No.
The AS path access list used to filter UPDATE messages
sent to peers in the update group.
Name of the prefix list used to filter prefixes advertised
to the peers in the update group.
Name of the route map used to filter and modify routes
advertised to the peers in the update group.
The number of peers added to the group since the group
was formed.
The number of peers removed from the group.
The number of times phase 3 of the BGP decision
process has run for this group to determine which routes
should be advertised to the group.
to this group. Incremented once for each UPDATE
regardless of the number of group members.
group. If no UPDATE has been sent to the group, the
status is "Never."
The number of prefixes currently advertised to the
group.
The number of paths currently advertised to the group.
The total number of prefixes advertised to the group
since the group was formed.
The total number of prefixes included in the
Withdrawn Routes field of UPDATE messages sent to
the group since the group was formed.
The number of UPDATE messages that failed to be
delivered to all members of the group.
The IPv4 address of all current members of the group.
Layer 3 Routing Commands
1341